JAMB Syllabus For Chemistry 2022 [Read & Download PDF]

JAMB Syllabus For Chemistry 2022 [Read & Download PDF]

Are you participating in the 2022 UTME? If yes, then that means you are among those that are searching online for the 2022 JAMB Chemistry Syllabus for the UTME Examination! Many people keep searching online for the JAMB Syllabus for Chemistry.

Well, you need not search anymore because you have finally arrived on the right page! Teezab.com.ng will always give you the best and correct information!

The syllabus is the easiest and convenient way to get relevant information regarding each subject’s Objectives, Topics, Contents, Notes, and Recommended Textbooks.

See JAMB Subject Combination for all courses here!

I believe you are a smart one and that is why you are searching for the JAMB 2022 Chemistry Syllabus for the UTME! So, be calm and read through!! Do not skip any part of this post as every single part of this post is essential for you to know if you wish to score high in this year’s UTME!

Well, without wasting much of your time, let’s dive into the real deal here! Here, you will find JAMB Syllabus for Chemistry! Read through this post and you can also download the PDF! 

Also, try to bookmark this page so you won’t miss out on any update! 

You can also subscribe to our website by entering your email and clicking on subscribe button below! We will notify you anytime there is a new update!

JAMB Chemistry Syllabus for 2022/2023 UTME [Read & Download PDF]

This is to Inform the general public most especially those that are going to participate in the 2022 Unified Tertiary Matriculation Examination UTME that the Joint Admission and Matriculation Board JAMB has released the syllabus for Chemistry for the 2022 UTME.

Hope you’ve checked the Subject Combination for your course? If not, please scroll up and check! It is very important so as not to choose wrongly because it might later affect you!

Are you having trouble finding the JAMB accredited CBT Centres near you? Click here to view accredited  JAMB CBT Centres in all 36 states in Nigeria and the FCT!

JAMB Chemistry Syllabus for 2022 UTME

Try to get to the bottom of this post to see the JAMB recommended Textbook for Chemistry! Get a Textbook and read! Also, try to make sure you practice JAMB Past Questions so as to familiarize yourself with the way JAMB sets questions! Hope you are noting those tips on how to get a high score in JAMB? YES! I know you are very smart!!!

Jamb Chemistry Syllabus 2022/2023 General Objective

The aim of the Unified Tertiary Matriculation Examination (UTME) syllabus in Chemistry is to prepare the candidates for the Board’s examination. It is designed to test their achievement of the course objectives, which are to:

Apply the basic principles governing scientific methods in new situations;

  • Interpret scientific data;
  • Deduce the relationships between chemistry and other sciences;
  • Apply the knowledge of chemistry to industry and everyday life.

Jamb Syllabus for Chemistry 2022/2023

1. Separation of Mixtures and Purification of Chemical Substance 

(a) Pure and impure substances

(b) Boiling and melting points.

(c) Elements, compounds, and mixtures

(d) Chemical and physical changes.

(e) Separation processes: evaporation, simple and fractional distillation, sublimation, filtration, crystallization, paper and column chromatography, simple and fractional crystallization.

2. Chemical Combination

Stoichiometry, laws of definite and multiple proportions, the law of conservation of matter, Gay Lussac’s law of combining volumes, Avogadro’s law; chemical symbols, formulae, equations and their uses, relative atomic mass based on 12C=12, the mole concept, and Avogadro’s number.

3. Kinetic Theory of Matter & Gas Law

(a) An outline of the kinetic theory of matter, melting, vaporization and reverse processes; melting and boiling explained in terms of molecular motion and Brownian movement.

(b) The laws of Boyle, Charles, Graham and Dalton (law of partial pressure); combined gas law, molar volume and atomicity of gases

4. Atomic Structure & Bonding

(a) (i)The concept of atoms, molecules and ions, the works of Dalton, Millikan, Rutherford, Mosely, Thompson and Bohr. Simple hydrogen spectrum, Ionization of gases illustrating the electron as a fundamental particle of matter.

(ii) Atomic structure, electron configuration, atomic number, mass number and isotopes; specific examples should be drawn from elements of atomic number 1 to 20. Shapes

of s and p orbitals.

(b) The periodic table and periodicity of elements, presentation of the periodic table with a view to recognizing families of elements e.g. alkali metals, halogens, the noble gases, and transition metals. The variation of the following properties should be noticed: ionization energy, ionic radii, electron affinity, and electronegativity.

(c) Chemical bonding: Electrovalency and covalency, the electron configuration of elements, and their tendency to attain the noble gas structure. Hydrogen bonding and metallic bonding as special types of electrovalency and covalency respectively; coordinate bond as a type of covalent bond as illustrated by complexes like [Fe(CN)6]3-, [Fe(CN)6]4-, [Cu(NH3)4]2+and [Ag(NH3)2]+; van der Waals’ forces should be mentioned as a special type of bonding forces.

(d) Shapes of simple molecules: linear ((H2, 02, C12,HCI and CO2), non-linear (H2O) and

tetrahedral; (CH4)

(e) Nuclear Chemistry:

(i) Radioactivity (elementary treatment only)

(ii) Nuclear reactions. Simple equations, uses and applications of natural and artificial radioactivity.

5. Air

The usual gaseous constituents – nitrogen, oxygen, water vapor, carbon (IV) oxide and the noble gases (argon and neon), the proportion of oxygen in the air e.g. by burning phosphorus or by using alkaline pyrogallol, air as a mixture, and some uses of the noble gas.

6. Water

Composition by volume: Water as a solvent, atmospheric gases dissolved in water, and their biological significance. Water is a product of the combustion of hydrogen. Hard and soft water: Temporary and permanent hardness and methods of softening hard water. Purification of town water supplies. The water of crystallization, efflorescence, deliquescence, and hygroscopy. Examples of the substances exhibiting these properties and their uses.

7. Solubility

(a) Unsaturated, saturated and supersaturated solutions. Solubility curves and simple deductions from them, (solubility defined in terms of mole per dm3) and simple calculations.

(b) Solvents for fats, oil, and paints and the use of such solvents for the removal of stains.

(c) Suspensions and colloids: Harmattan haze and paints as examples of suspensions and fog, milk, aerosol spray, and rubber solution as examples of colloids.

9. Acids, Base & Salt

(a) General characteristics and properties of acids, bases and salts. Acids/base indicators,

basicity of acids, normal, acidic, basic, and double salts. An acid defined as a substance

whose aqueous solution furnishes H3O+ions or as a proton donor. Ethanoic, citric and tartaric acids as examples of naturally occurring organic acids, alums as examples of double salts, preparation of salts by neutralization, precipitation and action of acids on metals. Oxides and trioxocarbonate (IV) salts

(b) Qualitative comparison of the conductances of molar solutions of strong and weak acids and bases, relationship between conductance, amount of ions present, and their relative mobilities.

(c) pH and pOH scale. pH defined as – log[H3O+]

(d) Acid/base titrations.

(e) Hydrolysis of salts: Simple examples such as NH4C1, AICI3, Na2CO3, CH3COONa to be mentioned.

10. Oxidation and Reduction

(a) Oxidation in terms of the addition of oxygen or removal of hydrogen.

(b) Reduction as removal of oxygen or addition of hydrogen.

(c) Oxidation and reduction in terms of electron transfer.

(d) Use of oxidation numbers. Oxidation and reduction treated as change in oxidation.

number and use of oxidation numbers in balancing simple equations. IUPAC nomenclature of inorganic compounds.

(e) Tests for oxidizing and reducing agents.

11. Electrolysis

(a) Electrolytes and non-electrolytes. Faraday’s laws of electrolysis.

(b) Electrolysis of dilute H2SO4, aqueous CuSO4, CuC12 solution, dilute and concentrated NaC1 solutions and fused NaC1 and factors affecting discharge of ions at the electrodes.

(c) Uses of electrolysis: Purification of metals e.g. copper and production of elements and compounds e.g. A1, Na, O2, Cl2 and NaOH.

(d) Electrochemical cells: Redox series (K, Na, Ca, Mg, AI, Zn, Fe, PbII, H, Cu, Hg, Au,)

half-cell reactions and electrode potentials. Simple calculations only.

(e) Corrosion as an electrolytic process, cathodic protection of metals, painting, electroplating and coating with grease or oil as ways of preventing iron from corrosion.

12. Energy Charge

(a) Energy changes(∆H) accompanying physical and chemical changes: dissolution of substances in or reaction with water e.g. Na, NaOH,K, NH4, Cl. Endothermic (+∆H) and exothermic (-∆H) reactions.

(b) Entropy as an order-disorder phenomenon: simple illustrations like mixing of gases and dissolution of salts.

(c) Spontaneity of reactions: ∆G0 = 0 as a criterion for equilibrium, ∆G greater or less than zero as a criterion for non-spontaneity or spontaneity.

13. Rates of Chemical Reaction

(a) Elementary treatment of the following factors which can change the rate of a chemical

reaction:

(i) Temperature e.g. the reaction between HCI and Na2S2O3 or Mg and HCI

(ii) Concentration e.g. the reaction between HCl and Na2S2O3, HCl and marble and the iodine clock reactio1n, for gaseous systems, pressure may be used as concentration term.

(iii) Surface area e.g. the reaction between marble and HCI with marble in

(i) powdered form

(ii) lumps of the same mass.

(iv) Catalyst e.g. the decomposition of H2O2 or KCIO3 in the presence or absence of MnO2

(b) Concentration/time curves.

(c) Activation energy Qualitative treatment of Arrhenius’ law and the collision theory, effect of light on some reactions. e.g. halogenation of alkanes

14. Chemical Equilibrium

Reversible reactions and factors governing the equilibrium position. Dynamic equilibrium. Le Chatelier’s principle and equilibrium constant. Simple examples to include the action of steam on iron and N2O4
  2NO2. No calculation will be required.

15. Non-metals and their compounds

(a) Hydrogen: commercial production from water gas and cracking of petroleum fractions, laboratory preparation, properties uses, and test for hydrogen.

(b) Halogens: Chlorine as a representative element of the halogen. Laboratory preparation, industrial preparation by

electrolysis, properties, and uses, e.g. water sterilization, bleaching, manufacture of HCl, plastics and insecticides. Hydrogen chloride and Hydrochloric acid: Preparation and properties. Chlorides and test for chlorides.

(c) Oxygen and Sulphur

(i) Oxygen: Laboratory preparation, properties and uses. Commercial production from liquid air.  Oxides: Acidic,basic, amphoteric and neutral, trioxygen (ozone) as an allotrope and the importance of ozone in the atmosphere.

(ii) Sulphur: Uses and allotropes: preparation of allotropes is not expected. Preparation, properties, and uses of sulphur (IV) oxide, the reaction of SO2 with alkalis.Trioxosulphate (IV) acid and its salts, the effect of acids on salts of trioxosulphate (IV), Tetraoxosulphate (VI) acid: Commercial preparation (contact process only), properties as a dilute acid, an oxidizing and a dehydrating agents and uses. Test for SO42-. Hydrogen sulphide: Preparation and properties as a weak acid, reducing and precipitating agents. Test for S2-

(d) Nitrogen:

(i) Laboratory preparation

(ii) Production from liquid air

(iii) Ammonia: Laboratory and industrial preparations (Haber Process only), properties and uses, ammonium salts

and their uses, oxidation of ammonia to nitrogen (IV) oxide and trioxonitrate (V) acid. Test for NH4+

(iv) Trioxonitrate (V) acid: Laboratory preparation from ammonia; properties and uses. Trioxonitrate (V) salt-action of heat and uses. Test for NO3-

(v) Oxides of nitrogen: Properties. The nitrogen cycle.

(e) Carbon:

(i) Allotropes: Uses and properties

(ii) Carbon(IV) oxide, Laboratory preparation, properties and uses. Action of heat on trioxocarbonate(IV) salts and test for CO32-

(iii) Carbon(II) oxide: Laboratory preparation, properties including its effect on blood; sources of carbon (II) oxide to include charcoal, fire and exhaust fumes.

(iv) Coal: Different types, products obtained from destructive distillation of wood and coal.

(v) Coke: Gasification and uses. Manufacture of synthesis gas and uses.

16. Metals and their compounds

(a) General properties of metals

(b) Alkali metals e.g. sodium

(i) Sodium hydroxide:- Production by electrolysis of brine, its action on aluminium, zinc and lead

ions. Uses including precipitation of metallic hydroxides.

(ii) Sodium trioxocarbonate (IV) and sodium hydrogen trioxocarbonate (IV): Production by Solvay process, properties and uses, e.g. Na2CO3 in the manufacture of glass.

(iii) Sodium chloride: its occurrence in sea water and uses, the economic importance of seawater and the recovery of sodium chloride.

(c) Alkaline-earth metals, e.g. calcium; calcium oxide, calcium hydroxide and calcium trioxocarbonate (IV);

Properties and uses. Preparation of Calcium oxide from seashells, the chemical composition of cement and the setting of mortar. Test for Ca2+.

(d) Aluminium Purification of bauxite, electrolytic extraction, properties, and uses of aluminium and its compounds. Test for A13+

(e) Tin Extraction from its ores. Properties and uses.

(f) Metals of the first transition series. Characteristic properties:

(i) electron configuration

(ii) oxidation states

(iii) complex ion formation

(iv) formation of coloured ions

(v) catalysis

(g) Iron Extraction from sulphide and oxide ores, properties and uses, different forms of iron and their properties and advantages of steel over iron. Test for Fe2+ and Fe3+

(h) Copper Extraction from sulphide and oxide ores, properties and uses of copper. Preparation and uses of copper (II) Tetraoxosulphate (VI). Test for Cu2+

(i) Alloy Steel, stainless steel, brass, bronze, type-metal, duralumin, soft solder, permallory and alnico (constituents and uses only).

17. Organic Compounds

An introduction to the tetravalency of carbon, the general formula, IUPAC nomenclature and the determination of

the empirical formula of each class of the organic compounds mentioned below.

(a) Aliphatic hydrocarbons

(i) Alkanes Homologous series in relation to physical properties, substitution reaction and a few examples and uses of halogenated products. Isomerism: structural only (examples on isomerism should not go beyond six carbon atoms). Petroleum: composition, fractional distillation and major products; cracking and reforming, Petrochemicals – starting materials of organic syntheses, quality of petrol and meaning of octane number

(ii) Alkenes Isomerism: structural and geometric isomerism, additional and polymerization reactions, polythene

and synthetic rubber as examples of products of polymerization and its use in vulcanization.

(iii) Alkynes Ethyne – production from action of water on carbides, simple reactions and properties of ethyne.

(b) Aromatic hydrocarbons e.g. benzene – structure, properties and uses.

(c) Alkanols Primary, secondary, tertiary – production of ethanol by fermentation and from petroleum by-products. Local examples of fermentation and distillation, e.g. gin from palm wine and other local sources and glycerol as a polyhydric alkanol. Reactions of OH group – oxidation as a distinguishing test among primary, secondary and tertiary alkanols (Lucas test)

(d) Alkanals and alkanones. Chemical test to distinguish between alkanals and alkanones.

(e) Alkanoic acids. Chemical reactions; neutralization and esterification, ethanedioic (oxalic) acid as an example of a dicarboxylic acid and benzene carboxylic acid as an example of an aromatic acid.

(f) Alkanoates Formation from alkanoic acids and alkanols – fats and oils as alkanoates. Saponification: Production of soap and margarine from alkanoates and distinction between detergents and soaps.

(g) Amines (Alkanamines) Primary, Secondary, and tertiary

(h) Carbohydrates Classification – mono-, di- and polysaccharides; composition, chemical tests for simple sugars and reaction with concentrated tetraoxosulphate (VI) acid. Hydrolysis of complex sugars e.g. cellulose from cotton and starch from cassava, the uses of sugar and starch in the production of alcoholic beverages, pharmaceuticals and

textiles.

(i) Proteins: Primary structures, hydrolysis and tests (Ninhydrin, Biuret, Millon’s and xanthoproteic) Enzymes and their functions.

(j) Polymers: Natural and synthetic rubber; addition and condensation polymerization. Methods of preparation, examples, and uses. Thermoplastic and thermosetting plastics.

18. Chemistry and Industry

Chemical industries: Types, raw materials, and relevance; Biotechnology.

Jamb Chemistry Syllabus Recommended Textbook

  • Ababio, O.Y. (2005). New School Chemistry for Senior Secondary Schools, (Third Edition),
  • Onitsha: Africana FIRST Publishers Limited
  • Bajah, S.T. Teibo, B.O., Onwu, G and Obikwere, A. (1999). Senior Secondary Chemistry,
  • Book 1, Lagos: Longman
  • Bajah, S.T., Teibo, B.O., Onwu, G and Obikwere, A. (2000). Senior Secondary Chemistry,
  • Books 2 and 3, Lagos: Longman
  • Ohia, G.N.C., Adewoyin, F.A. and Akpan, B.B. (1997). Exam Focus Chemistry for WASSCE
  • & JME: Ibadan: University Press Plc
  • STAN (1987). Chemistry for Senior Secondary Schools, Ibadan: Heinemann
  • Sylvester: O.O. (2004). A Comprehensive Practical Chemistry for Senior Secondary Schools,
  • Ibadan: Evans
  • Uche, I.O., Adenuga, I.J. and Iwuagwu, S.L. (2003). Countdown to WASSCE/SSCE, NECO, JME Chemistry,
  • Ibadan: Evans
  • Wisdomline Pass at Once JAMB.

Are you interested in Physics Jamb past Questions and answers with full explanation? Click here to practice and discuss!

CLICK HERE TO DOWNLOAD JAMB SYLLABUS FOR CHEMISTRY PDF

CLICK HERE FOR JAMB SYLLABUS (OTHER SUBJECTS)

If you find this post – JAMB Syllabus 2022 UTME for Chemistry – helpful and informative, kindly use the share button below to share with your friends!

If you have any question to ask, please feel free to drop it in the comment box below! I will make sure to reply to you as soon as possible and I will also try my best to give you a reply that will be satisfactory!

Follow our Facebook page and we will keep you updated! Also, don’t forget to subscribe to our website by entering your email and clicking the subscribe button below!

Leave a Comment

Your email address will not be published.